Installation of the rear transmission mount rear bolts that are too long will cause the bolt to contact the chassis and transmit noise and vibration ...
All to Preserve and Drive the Triumph
Category: BritCar Tech Tips
When refitting the fan blade assembly to the crankshaft hub/extension, care should be exercised ...
The tapered pipe thread filling plug has a square head that makes removal difficult. This is compounded by the fitting of a steel plug into an ...
When re-assembling the overdrive to the transmission adapter plate, it is important to observe the following in order to reduce the ...
When replacing the transmission, it is extremely important to maintain precise alignment of the transmission and engine.
When undertaking transmission removal/replacement, it is recommended that the upper starter mounting bolt be inserted ...
When any disassembly of the throttle linkage is undertaken, it- is extremely important to ensure that the throttle linkage is correctly ...
When replacing the manifold flange gasket, care should be exercised to ensure correct alignment of the gasket with the pipe ...
Electric solenoid operation of the Laycock DeNormanville "A" type hydraulic servo overdrive require two windings within the solenoid ...
Many clutch related problems can be traced to excessive wear of the clutch master cylinder push-rod clevis/pin wear resulting in a ...