Insufficient tightening of the TR6 factory oil filter bolt and/or use of more than one (1) filter sealing neoprene "O" ring, can promote ...
All to Preserve and Drive the Triumph
Category: BritCar Tech Tips
A low-pitched rumble or rattle from the right front of
the engine on the above models can be traced to the ...
On most Triumph models, the mounting studs/bolts are equally spaced so that the pump can be installed in any position ...
Conditions of pressurization and vacuum within the fuel tank can result in very unstable fuel delivery conditions and carb fuel ...
Unstable and erratic engine idle speed, (IE: idling at 800 one time, 1,200 rpm after the next throttle opening), can be traced to an ...
Extreme care should be exercised when removing the large wiper wheel-box nut securing the wheel-box to the scuttle mounting. If the wheel-box ...
To avoid subjecting the cooling system to air entry during cooling, ensure the end of the hose leading into the overflow bottle ...
Prior to attempting any carb mixture or idle adjustment, it is important to maintain an "airtight" engine interior and vent hose system, ...
Minor oilleak(s) from the oil filter area of the above model can be the result of: ...
Large gaskets, that have been stored in a very dry area for a long period of time, can shrink. This is dependent on the material ...