Installation of the rear transmission mount rear bolts that are too long will cause the bolt to contact the chassis and transmit noise and vibration ...
All to Preserve and Drive the Triumph
Tag: tr3
When refitting the fan blade assembly to the crankshaft hub/extension, care should be exercised ...
The tapered pipe thread filling plug has a square head that makes removal difficult. This is compounded by the fitting of a steel plug into an ...
When re-assembling the overdrive to the transmission adapter plate, it is important to observe the following in order to reduce the ...
Electric solenoid operation of the Laycock DeNormanville "A" type hydraulic servo overdrive require two windings within the solenoid ...
A low-pitched rumble or rattle from the right front of
the engine on the above models can be traced to the ...
Unstable and erratic engine idle speed, (IE: idling at 800 one time, 1,200 rpm after the next throttle opening), can be traced to an ...
Minor oilleak(s) from the oil filter area of the above model can be the result of: ...
All of the above models were equipped with a gear shift lever" anti-rattle" device comprised of a small spring-loaded ...
When the generator mounting bracket is being re- installed on the engine block of the above models, a sealant ...
- 1
- 2